Shinano SI-2210 4-Inch Disc Sander
For surface preparation, paint work, weld cleanup, and controlled material removal. 13,000 RPM; use a 3/8-inch minimum hose ID for the specified system.
View SI-2210 Details →Start with the Full Air Path, Not Just the Tool
A professional pneumatic tool can only perform as well as the air delivered to it. Plan the system from the compressor outlet to the tool inlet so the air remains clean, regulated, sufficiently lubricated where required, and unrestricted by undersized hoses or fittings.
| System Stage | Purpose | What to Check Before Ordering |
|---|---|---|
| Compressor | Supplies air volume and pressure. | Confirm usable CFM at the working pressure for the tools expected to run at the same time. |
| Moisture separation & filtration | Reduces water and contamination reaching the tool. | Choose filtration appropriate to the work, environment, and maintenance routine. |
| Regulation & lubrication | Sets controlled delivery pressure and supports tools that need oil. | Use a filter regulator or FRL unit where a lubricator is appropriate. |
| Hose, coupler & fitting | Delivers air to the tool. | Match inside diameter, run length, and connector flow to the tool’s air demand. |
| Shinano air tool | Converts prepared compressed air into productive work. | Confirm application, accessory, recommended pressure, and required hose ID. |
Tell Us What You Are Building
For a tool-and-air-system quote, provide the job type, the number of users, compressor output, hose run, and destination. We will help you identify a compatible Shinano tool, air-preparation components, and accessories.
Need the Complete Workshop Plan?
For a deeper guide to compressor sizing, CFM, PSI, air-delivery layout, hose selection, and essential workshop tools, read our comprehensive workshop article before specifying your system.
Read the Professional Workshop Setup Guide
Featured Shinano Tools for a Professional Air System
Each featured tool is linked to its product record and shown with an authentic product image from the Tendsupplies catalog. These are examples of application-led selections; submit an inquiry when you need a configured system or a multi-tool quote.
Shinano SI-4700B Air Saw
For controlled sheet-metal, panel, and fabrication cuts. 10,000 BPM with 10 mm stroke; specified for 90 PSI operation.
View SI-4700B Details →
Shinano SI-1610SR Impact Wrench
For automotive and maintenance fastening. 1/2-inch drive with 450 Nm maximum torque; use a sufficiently free-flowing 3/8-inch hose path.
View SI-1610SR Details →
Shinano SI-2740 Belt Sander
For narrow weld blending, deburring, and detail finishing. 10 x 330 mm belt and 15,000 RPM; specify compatible belts with your quote.
View SI-2740 Details →
Shinano SI-3101 Palm Sander
For controlled, professional surface finishing. 5-inch pad, 5 mm orbit, and 10,000 RPM; pair with clean, stable 90 PSI air.
View SI-3101 Details →Quick Tool & Air-Path Selection Table
| Application | Recommended Tool | Air-System Focus | Next Step |
|---|---|---|---|
| Auto body prep / weld cleanup | SI-2210 disc sander | Clean, regulated air; 3/8-inch minimum hose ID. | Select an air filter regulator |
| Panel cutting / fabrication | SI-4700B reciprocating air saw | Stable delivery pressure; lubricate as specified for the tool. | Explore FRL units |
| Automotive fastening | SI-1610SR impact wrench | High-flow hose and coupler path to protect torque at the tool. | Choose couplers & fittings |
| Detail sanding / narrow finishing | SI-2740 belt sander or SI-3101 palm sander | Flexible, non-restrictive hose and dry air to protect finish quality. | Browse air hoses |
Avoid the Most Common Air-System Mismatch
Do not judge an air system only by tank size or the compressor’s highest PSI rating. Start with the tools’ air demand, the expected simultaneous use, hose run length, and the restriction introduced by regulators, couplers, and fittings. Our Professional Automotive Workshop Setup Guide explains the planning principles in detail; this page is designed to help you turn that plan into a compatible purchase list.
Frequently Asked Questions
What information should I send for a pneumatic system quote?
Send the tool or application, number of users, compressor CFM at working pressure, intended hose length and inside diameter, site voltage if a compressor is involved, delivery destination, and required delivery date.
Why does an air tool lose performance even when the compressor is running?
The cause can be insufficient available CFM, pressure drop through a narrow or long hose, restrictive fittings, poorly set regulation, leaks, or water and contamination in the air line. Check the complete delivery path, not only the compressor gauge.
Should I use an FRL unit or only an air filter regulator?
Use a filter regulator where filtration and pressure control are needed. Use an FRL where the tool manufacturer’s maintenance practice calls for controlled line lubrication; do not introduce lubricated air into processes that require oil-free air.
Can Tend Industrial Supplies help build a multi-tool setup?
Yes. Use the inquiry form above or contact sales with the working application and the tools expected to run together. We can help structure a commercial recommendation around available components.
Ready to Build a Reliable Air Tool System?
Tell us the work you need to do, the air supply you have, and the tools you want to run. Tendsupplies will help you start with the right air-path components.
Get a Pneumatic System Quote Email Sales