Description
We are the dealer of Shinano tools in the USA. Our Shinano Pistol Pneumatic Air hammer SI-4120A comes with with "with Retaining Spring (400-8) x 1 without Chisels" accessories
About this tool
Shinano Pneumatic Hammer SI-4120A Shinano devised total solution of pneumatic tools which are build in Japan for your reliability and durability. With Shinano pneumatics, you can now focused on the job at hand as. Shinano's pneumatic tools is the smarter investment as it have fewer moving parts thus making it maintenance friendly, safer on operational, cheaper operational cost compared to electric tools which consumes higher energy when unstable current being used at variable speed. Shinano SI-4120A is an industrial pneumatically powered tool with the combination of power, compactness and light weight for a better operator comfort at speed. Shinano Pneumatic Hammer SI-4120A is equipped with a unique vibration dampening design for lesser fatigue on working with thick coat removal. Be advised that, if you have a light air compressor of 50% duty cycle, your motor can perform safely but you may overheat your compressor. Hence, a 5 hp compressor with a 100% duty cycle is going to make more air than a 7.5 hp compressor that only has a 75% duty cycle. With Shinano SI-4120A you can also use it as a chipping hammer to remove heavy rust, loose scale, weld scalers, coating, layered sea shell and paint, leaving a clean metal surface to work on. Different models offer choices of number of needles, operating speed, and power levels. For comparable alternative on removing rust and coating you can also opt for Shinano Pneumatic Needle Gun Scaler SI-4160 or Shinano SI-4160.
SPECIFICATION
|
Shank Sizein./(mm) |
.401/(10.2) |
|---|---|
|
Stroke Lengthmm |
Max 10 |
|
Free Blow Speeds.p.m. |
2,600 |
|
Weightkg/(lb) |
1.60/(3.52) |
|
Noise Level *dBA/(power) |
104/(116) |
|
Vibration *m/s2 |
9.0 |
|
Avg.Air ConsumptionCFM/(L/S) |
3.0/(1.4) |
DESCRIPTION
● Pistol grip air hammer for 10.2mm diameter chisels (.401" shank)
● Many kinds of the chisels are available as accessories
● High speed piston power of 2,600 times per min
● Powerful piston enable the tool to cope with many kinds of work
*Vibration level according to ISO 8662
ACCESSORIES
- Manufactured in Japan by SHINANO INC, these tools and accessories offer uncompromising industrial quality at reasonable prices.
- Some SHINANO models have been in continuous production since the Brand was first introduced into Australia in 1978.
- Large inventories of spare parts are held in stock and these include some parts for discontinued models.
- SHINANO Air Tools are your choice if you need tools that will give long reliable service in industrial production situations.
