Description
GRABO Nemo Suction Cup NG-2B-FB
Tend Industrial Supplies are suppliers of GRABO Lifting Equipment. This GRABO Nemo Suction Cup is a small but powerful tool that adds a handle to just about any surface. If you need to move, lift, or install a material that isn’t too porous or too textured, the GRABO H is an absolute necessity in your arsenal. The GRABO H is the new GRABO tool specifically made with a smaller design that is perfect for the weekend warrior and the do it yourself-er.
Different shapes and sizes of items will need a different approach, so the GRABO is designed to give you a firm and safe hold from both angles. You also need to consider the weight of what you’re lifting to use the GRABO safely. This chart provides you with the safe guidelines for carrying the main materials you will find yourself using with GRABO technology.
Specifications of GRABO Nemo Suction Cup NG-2B-FB
| Battery | 14.8VDC 2600mAh Li-ion |
|---|---|
| Rated Power | 16W |
| Charger Input Voltage | 100-240VAC 50/60Hz |
| Battery Charging Time | ~2hrs |
| Non-Stop Running Time (Full Charge) | 1.5hrs |
| Running Cycles (On Full Charge) | 900 ON-OFF cycles of 10 seconds |
| Stand-by Mode (Charge Hold) | 30 days |
| Pump Service Life | 100000+ ON-OFF cycles / 800+ hrs continuous |
| Rated Air Flow | 0.7cfm (20 L/min) |
| Maximum Vacuum Rate | 11.6Psi (0.8 Bar, 80 kPa) |
| Maximum Lifting Capacity | 375Lbs (170 kg) |
| L x W x H | 12.1 x 7.37 x 4.91” ( 297 x 181 x 121 mm ) |
| Net Weight (With Battery) | 3.3Lbs (1.6 kg) |
| Working Temperature | 32°F~140°F ( 0°~60 °C ) |
| Applicable Surface Type | Peak/valley heights less than 0.1” (3mm), arc less than 5° |
For more information contact our team
