GRABO H V2 Electric Suction Cup

(No reviews yet) Write a Review


Tend Industrial Supplies are suppliers of GRABO Lifting Equipment. This GRABO H V2 Electric Suction Cup is a small but powerful tool that adds a handle to just about any surface. If you need to move, lift, or install a material that isn’t too porous or too textured, the GRABO H is an absolute necessity in your arsenal. The GRABO H is the new GRABO tool specifically made with a smaller design that is perfect for the weekend warrior and the do it yourself-er.

Our GRABO H V2 Electric Suction Cup features a smaller handle so you can get the best ergonomically grip as possible. With a maximum lifting capacity of 165 lbs, or 75 kgs, this small but mighty tool will help you get the job done with ease. From simple jobs such as hanging a picture frame, to heavy jobs such as laying tile, the GRABO H offers that valuable extra hand, saving you time, and preventing strain or injuries on your body.

We’re extremely excited to bring this new tool to you. With the GRABO H, we aim to prove that heavy lifting, is truly made easy, and is not just for those on the professional job site, but for everyone.

Technical Specifications of GRABO H V2 Electric Suction Cup

Battery 7.4
Rated Power 10 W
Charger Input Voltage 100 -240VAC 50/ 60 Hz
Running Cycles (On Full Charge) 340 ON-OFF cycles of 10 seconds
Stand-by Mode (Charge Hold) 25 days
Pump Service Life 100000+ ON-OFF cycles / 800+ hrs continuous
Rated Air Flow 7 L /min
Maximum Vacuum Rate 11.6Psi (0.8 Bar, 80 kPa)
Maximum Lifting Capacity 165 lbs ( 75 kgs)
L x W x H 10.94 x 6.38 x 4.72(in)/ 278 x 162 x 120 (mm)
Net Weight (With Battery) 2.6Lbs ( 1.2kg )
Working Temperature 32°F~140°F ( 0°~60 °C )
Applicable Surface Type Peak/valley heights less than 0.1” (3mm), arc less than 5°
View AllClose