Condition Monitoring Equipment

Parker Kittiwake Ferrous Wear Meter (FG-K30258-KW) is a portable magnetometric instrument that detects and quantifies ferrous metal particles in lube oil samples in under 3 seconds. Delivering a direct PPM reading on its LCD screen with no laboratory, no...

Parker Kittiwake Fluid Condition Sensor ATEX (FG-K19400-EX) is an online, continuous oil condition monitoring sensor certified for use in hazardous (ATEX Zone 1) environments. It monitors dielectric constant, temperature, and relative humidity of lube...

Parker Kittiwake ANALEX pqL Ferrous Debris Monitor (FG-K17000-KW) is an online, real-time ferrous particle monitoring system designed for continuous installation in lube oil circuits. It quantifies ferrous wear debris by mass (in grams) using an...

Parker Kittiwake Hydraulic Particles Test Kit (FG-K14368-KW) is a portable, field-use kit for rapid on-site assessment of hydraulic fluid cleanliness. It enables technicians to perform ISO 4406 particle count classification in the field without sending...

Parker Kittiwake Cold Corrosion Test Kit (FG-K19763-KW) is a purpose-built on-board test kit for measuring iron content in cylinder drain oil from two-stroke marine diesel engines. It directly addresses the cold corrosion challenge introduced by IMO 2020...

Parker Kittiwake Economy Total Iron Kit (FG-K30500-KW) is a cost-effective, portable test kit for measuring total iron content in lube oil samples. It provides a fast, colorimetric indication of ferrous and non-ferrous iron wear debris concentration,...

Parker Kittiwake On-Line Metallic Wear Debris Sensor (FG-K19567-KW) is a continuous, real-time online sensor that detects and counts both ferrous and non-ferrous metallic particles in lube oil circuits. Unlike offline sampling methods, it provides...

Parker LinerSCAN Cylinder Liner Monitor (FG-K17400-KW) is an advanced online monitoring system for two-stroke marine diesel engine cylinder liners. It uses a magnetic sensor installed in the scavenge air space to detect and count ferrous wear particles...

Parker Kittiwake ANALEX rpd Wear Particle Depositor (FG-K19026-KW) is a laboratory-grade instrument that prepares high-quality wear particle analysis patches from oil samples for microscopic examination. It deposits particles uniformly onto a membrane...

Parker Kittiwake Oil Test Centre (OTC) (FG-K4-120-KW-A) is a comprehensive, integrated on-board oil analysis system that combines multiple test instruments into a single portable case. It enables ship engineers and maintenance technicians to perform a...