MAXXEON WorkStar® 430 INSPECTOR MAXX Combination Rechargeable LED Work Light and Penlight
Tend Industrial Supplies LLC is a distributor of Maxxeon Lighting products a range of innovative products. Our MAXXEON WorkStar® 430 INSPECTOR MAXX Combination Rechargeable LED Work Light and Penlight is a rugged, rechargeable, industrial grade combination 220 lm work light plus a 135 lm penlight and is competitively priced.
INSPECTOR MAXX says don't waste your money on batteries, get the rechargeable inspection light that pays for itself!
The WorkStar® 430 worklight has 7 LEDs with an output of 220 lm compared to 6 LEDs with an output of 200 lm on the previous WorkStar® 420 model. Also, the magnet is stronger and 3-LED battery life and charge level indicator has been added.
The MAXXEON WorkStar® 430 (aka INSPECTOR MAXX) is a rugged, industrial-grade combination 220 lm 7-LED work light plus a 135 lm penlight. Not only that, it's rechargeable! Using the latest LiPo (Li-ion Polymer) battery technology, it includes a micro USB port and an USB cord for easy recharging. Three green LEDs are arranged in a bar graph format to indicate both the battery life and the charge level.
INSPECTOR MAXX also features a sturdy pocket clip with a built in magnet. You can clip it to your pocket with the work light illuminating your work area, or stick the magnet on a convenient ferrous surface to light up your work area. Or, you can hold on to the body and use it as either a work light or a penlight. No wonder INSPECTOR MAXX says, "Turn me on and start INSPECTING!"
The rugged WorkStar® 430 LED Pocket Floodlight is designed for daily use by technicians in demanding shop, manufacturing and maintenance environments. The tough aluminum body is anodized red and is virtually indestructible. The rugged tailcap switch is rated at 100,000 cycles and is sealed to avoid contamination by dirt and grit.
Specifications of this product
|LED Brightness (Luminous Flux)||✱ Work Light: 220 lumens, Penlight: 135 lumens|
|LED, Color, Power||Custom, Cool White, 3 W|
|Work Light Beam||7 inline LEDs + a custom designed lens creates a floodlight beam - no rings, no shadows, no hot spots. The beam diameter to distance ratio is 1.5:1, for example, the beam diameter is 3 ft wide when the light is 2 ft from an object.|
|Penlight Beam||Custom designed flood reflector creates a handy narrow beam - no rings, no shadows, no hot spots. The beam diameter to distance ratio is about 1:2, for example, the beam diameter is 1 ft wide when the light is 2 ft from an object. The ANSI FL-1 beam throw is 157 ft (48 m).|
|Power/Brightness Switch||Push button switch cycles through Work Light-Penlight-Off...|
|Battery Included||3.7V 800mAh LiPo (Li-ion Polymer) rechargeable battery; USB recharging cord included|
|Run Time||Work Light: 1.5 hours, Penlight: 2 hours|
|Recharge Time||2.5 hours|
|Battery Life and Charge Indicator||✱ Three green LEDs are arranged in a bar graph format to indicate both the battery life and the charge level|
|Charging Input||Micro USB|
|Aluminum Body||Rugged Aluminum with Red Type II Anodizing and Black Plastic Accents|
|Magnetic Penclip||✱ A handy magnet is built into the penclip (430: increased magnetic strength)|
|Length||7 inches (18 cm)|
|Width||7/8 inches (2.2 cm)|
|Thickness||1/2 inches (1.3 cm)|
|Weight||2.2 ounce (61 grams)|
|Temperature||15º to 105ºF (-10º to +40ºC)|
|Ingress Protection||IPX3 = not water resistant, do not immerse in liquids.|
|Drop Test||6 ft (2 m)|
|Included||WorkStar® 430, 18 inch (45 cm) USB charging cord|
|Warranty||1 year against manufacturing defects|
|UNSPSC code||39111610 Flashlight|
✱ New or improved performance compared to previous model.